Common Alarm Settings - Avaya DECT R4 Installation And Administration Manual

Common alarm settings

Note:
This feature is applicable for Avaya 3749 telephone only.
Note:
The parameters described in this chapter are applicable for all alarm types: the Push-Button
Alarm, the Man-Down Alarm, and No-Movement Alarm.
In a template or Number in PDM/AIWS, the parameters for activation are found at Alarm >
Common.
Parameters in the current version are:
Password protect ALS - Determines if a password is required to turn off the ALS.
●
Number for automatic call after alarm - The number to be called after an alarm has been
●
sent. The number can also be called without sending an alarm by pressing the push
button. See Call Predefined Number without Sending Alarm on page
Push button alarm
Note:
This feature is applicable for 3749 only.
Note:
It is possible to configure how alarms shall be handled in a system. You can activate an alarm in
two different ways:
A single long press
●
Multiple presses
●
The following alarm types are handled:
Push-button alarm
●
Test alarm
●
In a template or Number in PDM/AIWS, the parameters for activation are found at Alarm >
Alarm on long press and Alarm > Alarm on multiple press.
Parameters in the current version are:
Alarm type for long press - Test alarm, Push-button Alarm 1, Push-button Alarm 2, or
●
Not used. If Not used is selected, it is still possible to dial a predefined number after alarm
number without sending an alarm.
Alarm type for multiple press - Test alarm, Push-button Alarm 1, Push-button Alarm 2, or
●
Not used. If Not used is selected, it is still possible to dial a predefined number after alarm
number without sending an alarm.
ALS - Acoustic Location Signal enabled.
●
Avaya DECT R4 - Installation and Maintenance Guide
Telephone configuration
233
02/2016