Dect - Avaya DECT R4 Installation And Administration Manual

Installing and operating the IPBS and IPBL
Server: The IP address and port of the LDAP server
●
Remote: The state of replication in the source directory that includes the three possible
●
states: Stopped, Active, Completed
Notify: The number of change notifications received from the server
●
paged: The number of objects received from AD server in response to paged search
●
requests
No match: The number of objects received that do not match the configured LDAP
●
filter condition
Discarded: The number of objects discarded because no suitable map is found
●
Local: The state of replication in the destination directory. Three states are possible:
●
Stopped, Active, Completed
Notify: The number of change notifications sent to the server
●
Add: The number of locally added objects
●
Del: The number of locally deleted objects
●
Modify: The number of locally modified objects
●
Pending: The number of local objects waiting to be sent to the server
●
Expert tool
Consult Avaya Technical Support before using the Expert tool.

DECT

This section describes how to do the following configurations and settings.
Change DECT user name and password
●
Change Subscription Method
●
Configure Authentication Code
●
Set Default Language
●
Set Frequency Band
●
Enable or Disable Carriers
●
Configure Coder
●
Configure Supplementary Services
●
Select Master Mode
●
Configure Trunks
●
148
Avaya DECT R4 - Installation and Maintenance Guide 02/2016