Cable Instructions For The Ipbl - Avaya DECT R4 Installation And Administration Manual

Installing and operating the IPBS and IPBL

Cable instructions for the IPBL

Pinning the cable for IPBL
All data cables used for the IPBL is standard CAT5 unshielded cable. Ensure that
installation personnel know how to crimp these connectors to a cable.
Preparing the synchronization cable
1. The maximum cable length between two IPBLs must not exceed 2000 meters. Cut the
cable to the correct length.
2. Connect the cable to an RJ45 modular jack.
Figure 27: Pin diagram for Sync IN cable connections
90
Avaya DECT R4 - Installation and Maintenance Guide
LAN Synchronization Reference
IP DECT Gateway
1 2 ring in ring out in out
RJ45
modular jack
1 2 3 4 5
Base Station 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
6 7 8
Tx = Transmitter data pair
Rx = Reciever data pair
Sign = Signalling
02/2016