Avaya DECT R4 Installation And Administration Manual page 81

Fixing the mounting bracket to a wall
1. Hold the mounting bracket with its flat side against the wall with the text 'TOP' upwards
and mark the two holes. The minimum distance between the upper hole and the ceiling or
any object above the base station must be at least 65 mm for the IPBS1 and 100 mm for
the IPBS2. See
base station on to the bracket.
2. Drill the two holes using a
3. Position the mounting bracket with its flat side to the wall and fasten it with the two  3.5
mm screws that are included in the box.
Figure 17: Fixing the mounting bracket to a wall
Ceiling
Avaya DECT R4 - Installation and Maintenance Guide
figure 17. If the distance is less than 65/100 mm, you cannot slide the the
6 mm drill, and insert the wall plugs included in the box.
65 mm (IPBS1)
100 mm (IPBS2)
TOP
Installing the Base Station
02/2016
81