Avaya DECT R4 Installation And Administration Manual page 262

Configuring Avaya Aura
Configuring the station
The DECT station administration Type should be XMOBILE, the XMOBILE Type should be
DECT and the Configuration Set should be blank. The Avaya 3720/3725 and 3740/3749
DECT sets support ICON Message Waiting, therefore Message Lamp Ext has to be set to the
station number and Length of Display to 16x2. For the Mobility Trunk Group select the
appropriate Trunk group. Cell Phone Number needs to be set to the station number and
Mapping Mode to both.
Note:
If the feature "Redirect in charger" should be used, in Page 3 of 4, No Reply For
Note:
Internal/External Calls has to be set to Y.
Application Note:
The DECT station administration Type should be XMOBILE, the XMOBILE Type should
be DECT, and the Configuration Set should be blank. The Avaya 3720/3725 and 3740/
3749 DECT sets support ICON Message Waiting, therefore Message Lamp Ext has to be
set to the station number and Length of Display to 16x2. Cell Phone Number needs to
be set to the station number and Mapping Mode to both.
For the Mobility Trunk Group, select the appropriate trunk group. At least one of the
Primary Trunks to the IPBS Master should be selected. The mobility trunk group will be
updated automatically in the station form according to the currently used trunk. This will be
achieved by sending a proprietary H.323 X-Mobile message for each station on the
currently assigned trunk from the IPBS Master or Standby Master to the Communication
Manager.
If the feature "Redirect in charger" should be used, No Reply For Internal/External Calls
has to be set to Y.
262
Avaya DECT R4 - Installation and Maintenance Guide
®
Communication Manager
02/2016