Predefined Groups - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2

Predefined groups

Note:
My Groups are created from the NetPage and are not to be mistaken for the
Note:
groups created from the Configuration page in AIWS. This functionality is only
accessible from index4, see
Common groups
Common Groups can be used by all NetPage users. It is possible to create up to 30 predefined
Common Groups with up to 50 Call IDs in each. These groups are stored on the FTP area.
My groups
My Groups are stored locally and can only be accessed or changed from the PC where they
are stored.
There is a limited storage area. This means that, for groups with approximately 20 characters
(name and Call ID), the following applies:
Amount of Groups
10
15
20
Creating groups in My Groups
1. Click the Common Groups or My Groups button in NetPage. For Common Groups
enter the user name "user" and the password "password".
2. Click Add group.
3. Enter a name for the group in the Name text field.
4. Click the To button and select users (from the phonebook) to be members of this group or
enter number in the Call ID text field and click Add.
5. Click Save.
6. Click Close to exit the administration.
Editing Groups
1. Click the Common Groups or My Groups button in NetPage. For Common Groups
enter the user name "user" and the password "password".
498
Avaya DECT R4 - Installation and Maintenance Guide
figure 162 on page 490.
Group Members
19
7
2
02/2016