Avaya DECT R4 Installation And Administration Manual page 365

Installation and configuration
After installing the AIWS, the basic configuration is easily done with the help of a setup wizard.
The wizard includes all basic settings needed to get the AIWS up and running.
Required information
Make sure the following information is available:
Information required for the installation
MAC address – found on the license certificate enclosed in delivery
●
An IP address is needed, see
●
started with AIWS2
Information required for the configuration
License number – found on the license certificate enclosed in delivery
●
Network parameters – ask your network administrator
●
Type of connected wireless phone system
●
IP address to connected system (if connected via IP)
●
Other messaging systems to send messages to (optional)
●
LDAP properties if an LDAP server is used for Central Phonebook requests (optional)
●
Hardware installation and configuration
For information on installation and configuration Elise 2 Server (AIWS Hardware), see
Elise 2 Server (AIWS Hardware)
Note:
Attach the ferrite bead on the power supply cable. Follow the enclosed assembly
Note:
card for EMC protection, M0271500.
For information on installation and configuration of the Elise 3 Server (AIWS2 Hardware), see
Installing the Elise 3 Server (AIWS2 Hardware)
Avaya DECT R4 - Installation and Maintenance Guide
Getting Started with the AIWS
on page 509
on page 523.
Installation and configuration
on page 505 and
on page 570.
Getting
Installing
365
02/2016