Avaya DECT R4 Installation And Administration Manual page 373

- Set UNS Default Category for messaging to function:
In Configuration > Other Settings > Advanced Configuration > Other > UNS >
Default category:
Enter the IP address and name of the messaging handler, here "192.168.0.3" and
"DECT".
Click Activate.
- Disable the DECT interface on the AIWS B because it's not used. If the DECT
interface is disabled the AIWS will not show any error logs, because of an non
connected DECT interface. Select advanced configuration - general settings -view
advanced parameters. Set DECT interface to disable.
Figure 88: Setting UNS Default Category
AIWS C (OAP)
●
- The DECT connection is configured in the AIWS Setup Wizard.
- In Configuration > Other Settings > Advanced Configuration > Device
Management:
Remove all IP addresses.
- In Configuration > Other Settings > Advanced Configuration > Other > UNS >
Alias / Call ID > 999999:
In the UNITE Address field, set to the IP address of AIWS B plus /Phonebook, that is,
if AIWS B has the address 192.168.0.2, set to 192.168.0.2/Phonebook.
Figure 89: Setting Unite IP address
Avaya DECT R4 - Installation and Maintenance Guide
Installation and configuration
02/2016
373