Avaya DECT R4 Installation And Administration Manual page 413

Figure 113: Editing parameters in AIWS GUI
Note:
When you save the parameters, they are automatically sent to the device if it is
Note:
online.
Running a template to set parameter values
If a template has been created for a device type, it can be used to set the parameter values for
a range of devices, or a single device. The command to use is Run template.
1. Select the Numbers tab. The Number view opens.
2. Select the Number(s) you wish to run the template on.
3. In the Number menu, click Run template.... Alternatively, right-click on the Number in the
Number list and select Run template... from the menu that appears. The Run template
window appears.
Avaya DECT R4 - Installation and Maintenance Guide
Device Manager
413
02/2016