Avaya DECT R4 Installation And Administration Manual page 701

Table 10: Tools in the Elise 3 server
Tools
LEDs
Demonstration
mode
Active Faults
Fault logging
System
Information
Avaya DECT R4 - Installation and Maintenance Guide
Description
The LEDs show different colours to determine type of
information and have different flashing frequency for
showing the priority.
Color
Red
Yellow
Blue
Flashing frequency
Fixed light
Slow flashing light
Quick flashing
Demonstration Mode is activated by pressing the
Mode button for 10 seconds. The module will then
run with full functionality for 2 hours, it then returns to
the configured license! If it works in Demonstration
Mode and not in normal operation you probably have
a license problem.
The Active faults page lists the last 100 received
active persistent fault logs.
The fault log is a centralized log file and shows a
complete log of the faults in the system. Every time a
fault message is generated in the system, information
about the fault is written to the log file. The maximum
number of entries in the log file is 1050. When the log
file is full, the 50 oldest entries are removed.
You can view the snapshots of logs or complete logs
on the Advanced configuration page. Access to the
Advanced configuration page requires administrator
privileges.
Avaya In-Building Wireless Server (AIWS)
Indication
Fault indication
Mode indication
Normal operation
Indication
Indicates normal state
indicates medium
attention
Indicates high attention
701
02/2016