Enable or disable Radio
●
Configure multiple Radios
●
Assign PARI
●
Enter SARI
●
Configure Air Synchronization
●
Enable SRTP
●
Figure 45: The DECT System configuration page
Changing the system name and password
Note:
This configuration only applies to a Master IPBS/IPBL, not to a Slave IPBS/IPBL.
Note:
The system name and password must be the same for all base stations/IPBLs throughout the
system. Reset in order to make the changes take effect, see
1. Select DECT > System.
Note:
To access the System tab, activate the Master mode. See
Note:
page 154.
2. Write a system name in the System Name text field.
3. Enter a new password in the Password text field. Repeat the password.
Avaya DECT R4 - Installation and Maintenance Guide
Reset
on page 190.
Selecting Mode
02/2016
Operation
on
149