Installing New Software - Avaya DECT R4 Installation And Administration Manual

Installing and operating the AIWS and the AIWS2

Installing new software

Note:
It is not recommended to use the module's Management port when installing
Note:
software. Ensure that no Device Manager client is open and it is also important
that no ftp client is logged in to the module.The information stored in the database
will not be overwritten when new software is installed. Files in the netpage folder
in the ftp area that are new or changed are kept when updating.
1. Click "Configuration" on the start page.
2. Select Software > Installation in the menu on the Configuration page.
3. Select software (.pkg) to upload. The software will replace the not running software.
4. Select "Switch immediately" if you want to run the new software.
5. Select "Copy current settings" if you want the new software to inherit the settings
currently used.
6. Click the "Start Installation" button.
Creating a software backup
It is recommended to now and then create a backup of the software configuration.
1. Click "Configuration" on the start page.
2. Select Software > Installation in the menu on the Configuration page.
3. Click the "Backup" button.
Note that the backup will contain configuration for the running software only.
Upgrading the boot software
For instructions on upgrading the Elise 3 hardware with new Boot software (autoupdate.bin)
refer to Performing a field upgrade of the boot software
See Avaya In-Building Wireless Server (AIWS)
508
Avaya DECT R4 - Installation and Maintenance Guide
on page 591.Troubleshooting
on page 693.
02/2016