Avaya DECT R4 Installation And Administration Manual page 453

8. Enter settings for Location (former IP region) and digit treatment.
9. Click Activate.
The following parameters can be configured for digit treatment:
Digit Treatment (Enabled or Disabled)
●
The digit treatment function can be enabled and disabled. If the function is enabled, the
parameters below apply, otherwise they do not apply.
Name
●
A textual description of the current Location (former IP region).
ID
●
An identifier for the Location (former IP region) represented by a numerical value between
1-250. The Location ID (former region ID) set in the IPBS Master or Standby Master needs
to correspond to one of the configured Location ID (former Region IDs) in the AIWS. The
digit treatment for a central phonebook query in the handsets will be done according to the
defined rules for the Location (former IP region) of the IPBS Master and Standby Master
the handset is connected to. Multiple IPBS Masters and Standby Masters in an IP DECT
system can use the same Location ID (former Region ID), so they will use the same digit
treatment rules.
Country Code
●
The Country Code is the prefix to be used when dialling to a particular country from
another country. The country code is what follows after the + in a telephone number.
The value is used to identify the country code in the number and remove it when it is not
needed.
National Destination Code
●
The National Destination Code (NDC) is what follows after the country code in a telephone
number.
The value is used to identify the NDC in the telephone number and remove it when it is not
needed.
International Prefix
●
The International Prefix is used to dial a call from a particular country to another country.
This is followed by the country code for the destination country.
This value is used to replace the + character when an international call is made.
National Prefix
●
National Prefix is used to make a call within a country from one city to another. The
national prefix is followed by the national destination code for the destination of the call.
This value is used for two purposes:
- To identify the national prefix in the number and remove it when it is not needed.
Avaya DECT R4 - Installation and Maintenance Guide
Basic Configuration
453
02/2016