Avaya DECT R4 Installation And Administration Manual page 129

- Example 2: Use the hh:mm format for timezones that have less than a full hour
Dst = Name of summertime zone (for example EDT for Eastern Daylight Time).
●
Second Offset = time difference between the summer time and the UTC.
●
Date/ Time, Date/ Time = beginning and end of summertime.
●
- date format = Mm.n.d (d day of n week in the m month)
- time format = hh:mm:ss in 24-hour format.
Note that a week always starts on a Sunday and the number for Sunday is 0.
Example 1:
North Carolina is located in the Eastern Time Zone, and the Eastern Standard Time (EST)
is 5 hours behind UTC (StdOffset = EST5). Eastern Daylight Time (EDT) is 4 hours behind
UTC (DstOffset = EDT4). Summertime for the year 2006 begins at two o'clock, on a
Sunday, the first week in April (M4.1.0/2). Summertime ends at two o'clock, on a Sunday,
the fifth week in October (M10.5.0/2).
<String = EST5EDT4,M4.1.0/2,M10.5.0/2>
Example 2:
Indian Standard Time (IST) is 5:30 hours ahead of UTC (StdOffset = IST-5:30). India has
no daylight saving time:
<String = IST-5:30>
6. Click OK.
Note:
If you remove or change this value, the new value takes up to 24 hours to reflect
Note:
on the cordless telephone. If you switch a cordless telephone off and on again,
the changes take effect immediately.
Configuring logging
You can collect logs in the following three ways:
TCP
SYSLOG
HTTP
Storing Syslog entries using a TCP Connection
1. Select General > Logging
Avaya DECT R4 - Installation and Maintenance Guide
difference with UTC. For example, for Indian Standard Time (IST=UTC+5:30),
enter -5:30 (UTC=IST-5:30).
The syslog entries are transmitted using a TCP connection.
The entries are reported to a "syslogd" server in the network, which
further evaluates or stores the entries.
The syslog entries are transferred to a Web server for further
processing. Each individual syslog entry is transmitted as form data to
the web server in HTTP GET format.
Operation
129
02/2016