Installing and operating the Advanced Charger
Installation and configuration
!
Important:
Installation of the unit is NOT permitted in an hazardous area. Only an authorized
Important:
personnel must install the unit.
Advanced Charger installation
The chargers shall be placed in a dry environment with a temperature range from 5° C up to
+ 40° C.
Delivery includes:
Advanced Charger
●
Power Supply Cable (AC cord with corresponding wall plug)
●
Power Supply adapter including DC cable
●
USB cable
●
No tools are required.
Figure 59: Advanced Charger connections
From left: DC power, Ethernet LAN, Ethernet PC and USB.
1. Connect the AC power supply cord to the adapter.
2. Connect the power supply cord to the wall socket.
3. Connect the DC cable to the charger. The charger LED indicates the status of the charger.
See table in chapter
4. Connect the Advanced Charger to the pc with a USB or Ethernet cable.
One of the Ethernet connections is used for communication with a PC and the other can be
used for LAN connection. Power over Ethernet is not supported.
272
Avaya DECT R4 - Installation and Maintenance Guide
Operation
on page 277.
USB
02/2016