Software Administration On The Aiws2 - Avaya DECT R4 Installation And Administration Manual

Software administration on the AIWS2

On AIWS2 there are 2 partitions available to manage and install the module software via web
interface on the configuration page.
In addition to the software administration through the configuration page on the AIWS2, you can
also administer the software via the module's Boot Mode GUI.
See Installing software in boot mode
software is installed on the module or if it is impossible to access the software.
Software information
All information about the installed software is shown in this view. Two software versions can be
installed on the module.
1. Click Configuration on the start page.
2. Select Software > Information in the menu on the Configuration page.The software
name, versions, the date they were installed and also which version that currently is
running are shown.
Toggling with software
If two software versions are installed on the module you can switch between them.
1. Click "Configuration" on the start page.
2. Select Software > Switch in the menu on the Configuration page.
3. Select settings, either "Copy current setting" or "Use factory default settings".
Current settings means that you copy the configuration from the software you are currently
using.
4. Click "Switch".
Avaya DECT R4 - Installation and Maintenance Guide
on page 592. The Boot Mode GUI is typically used if no
Software administration on the AIWS2
507
02/2016