Installing and operating the AIWS and the AIWS2
AIWS Overview
Authentication Levels and Default Passwords
Figure 90: AIWS start page
AIWS has different authentication levels:
Using the Send Message function, i.e. creating and sending messages can be done by
●
default by any user in the system and requires no password.
User rights are required for the administration of the phonebook and opening the device
●
manager. Default user name and password are "user" and "password".
Administrator rights is required for the setup, the configuration and administration, simple
●
troubleshooting and changing passwords (except for the sysadmin password). Default
user name and password are "admin" and "changeme".
System Administrator rights is used for advanced troubleshooting, gives access to all
●
administration pages and the permission to change all passwords. Default user name and
password are "sysadmin" and "setmeup".
Auditor rights gives basically the same access as Administrator rights, but without
●
permission to alter values. There is no access to the Setup Wizard or the Device Manager.
Default user name and password is "auditor" and "readonly".
For information about password protection of NetPage, see
NetPage
on page 492.
378
Avaya DECT R4 - Installation and Maintenance Guide
Password Protected Access to
02/2016