Avaya DECT R4 Installation And Administration Manual page 599

Avaya DECT R4 - Installation and Maintenance Guide
Table 9: IO Input Output
Feature
Serial ports:
2 × RS232 (D-sub-9 male connectors), used for
external interfaces
ESPA, Line protocol, TAP, etc.
2 × modular jacks (RJ45) used for System 900 A-bus
1 × screw terminal used for System 900 A-bus
1 × screw terminal used for LON bus
LAN:
2 (One for future use, not yet software supported) ×
10baseT or 100baseT Ethernet (Modular jack, RJ45)
USB ports
2 × USB Host port 2.0 full speed
1 × Mini-USB_B Device port 2.0 full speed
Error relay output:
Configurable solid state relay – make/break
operation, used for fault actions and error
indications, 100 mA, 30 V DC
AUX outputs:
2 × galvanically isolated open collector outputs, 100
mA, 30 V DC
AUX inputs:
2 × digital inputs
Power supply:
1 × screw terminal for a 12-24 V DC external power
supply,
or 12 V DC lead battery max. 10 Ah
Maintenance information for the AIWS2
Elise 3
Lite
-
-
-
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
599
02/2016