Ic Requirements For Canada - Avaya DECT R4 Installation And Administration Manual

Installing Elise 3 Server (AIWS2 Hardware)

IC Requirements for Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B conforme á la norme NMB-003 du Canada.
EU Compliance Statements for Class A Device
This is a limit-class A device. This device can cause radio interference in residential areas, in
which case the owner may be required to undertake appropriate countermeasures.
AIWS2 Overview
Connectors, LEDs and buttons
The Elise 3 Server (AIWS2 Hardware) front panel has various status indicators and is used for
maintenance. The LEDs indicates the status of the module and the management port makes it
possible to have direct connection to the module. It also has an SD card slot and two USB ports
for external temporary devices.
The rear panel is used for connecting supply voltage, communication to external systems and
for connecting inputs and outputs. It has two LAN connections, two com ports for
communication with external devices, one mini-USB port for easy management and is equipped
with two galvanically isolated physical inputs and outputs. The inputs can be used for trigger
conditions which in turn can use the outputs for actions. It also has the A bus connector, the
LON connector, AUX input and outputs, and a error relay output conection on the rear panel.
The rear side also houses the connections for the external battery and AC power supplies.
560
Avaya DECT R4 - Installation and Maintenance Guide 02/2016