Avaya DECT R4 Installation And Administration Manual page 587

Setup using the Setup Wizard
1. Access the module either via the network or via the management port, see
Elise 3 Server (AIWS2 Hardware)
2. Enter user name "admin" and the password "changeme".
3. Complete the Setup Wizard (If the module's network IP address has not been assigned by
an DHCP server, it must be set manually in the wizard).
4. Select "Restart immediately" when the setup wizard has finished.The module will restart
with the new configuration.
Setup using the Advanced configuration page
1. Access the module either via the network or via the management port, see
Elise 3 Server (AIWS2 Hardware)
2. Enter user name "admin" and the password "changeme."
3. Click "System Setup" and navigate to "Network". Set the network parameters.Use the
online help if any problems occur.
4. Click "License" and enter the license number.
5. Set the time, see
6. Change the default passwords for all users. If the passwords are not changed, anyone
with knowledge of the default passwords can access the module and change any
parameter.
7. Restart Elise 3 Server (AIWS2 Hardware) Select "Reboot" in the menu and click the
"Reboot" button.
8. When the Elise 3 Server (AIWS2 Hardware) restarts, enter the URL xxx.xxx.xxx.xxx/admin
in your browser (xxx.xxx.xxx.xxx is the IP address that was given to the Elise 3 Server
(AIWS2 Hardware) during network setup) to see that it has started up correctly.
Changing secured settings
To be able to activate some security settings it is required that someone physically confirms the
changes on the module. This is a security feature due to the remote access (LAN or VPN) ability
on the Elise 3 module. An Elise 3 module is often locked in some kind of secured area that only
approved users have access to (such as the server room).
When you click the "Activate" button for a secured setting, the web user interface prompts the
user to confirm the secured change by pressing the Mode button on the module. The module's
Mode button LED indicates that a confirmation is needed with a quick flashing blue light.
Avaya DECT R4 - Installation and Maintenance Guide
on page 580
on page 580.
Clock synchronisation and time Settings
Mode LED
Installing the Elise 3 Server (AIWS2 Hardware)
on page 588.
Accessing the
Accessing the
587
02/2016