Clearing Lists When Inserted In Charger - Avaya DECT R4 Installation And Administration Manual

Redirect - The telephone will redirect all calls and messages when placed on charger.
●
(not available in Integral mode).
Change profile - the handset will change profile when placed in charger. In the Change
●
to profile drop-down list, select the profile to be used. By default, only the profile
Normal is selectable. If configured, additional profiles will be visible. See
page 237.
Message absence - When an application/system sends a message to a handset, it will
●
receive an indication that the handset is absent. If a handset is absent, the application/
system determines if the message shall be sent to the handset or not, or redirected to
another handset.
In Charger action when in call
The telephone can be configured to end a call or turn on the loudspeaker when it is placed on a
charger during a call. If the telephone is removed from the charger during the call, it will not
return to its previous settings.
1. Select Connections > In Charger.
2. In the Call behaviour drop-down list, select one of the following:
No action - No action will be performed when the telephone is placed on charger.
●
End - The telephone will disconnect calls when placed in charger.
●
Put on Loudspeaker - The telephone will activate the loudspeaker mode when placed
●
on charger.

Clearing lists when inserted in charger

The telephone can be configured to clear lists when placed on a charger. The following lists will
then be cleared:
Inbox (for 3725, 3740, 3745, and 3749)
●
Unsent (for 3725, 3740, 3745, and 3749)
●
Sent (for 3725, 3740, 3745, and 3749)
●
Call list
●
Missed calls
●
Note:
Both call lists and message lists will be cleared. However, this option is not valid if
Note:
the handset is in Integral mode.
Avaya DECT R4 - Installation and Maintenance Guide
Note:The destination number must be programmed in the PBX to be able to
redirect calls and messages.
Telephone configuration
Profiles on
229
02/2016