Avaya DECT R4 Installation And Administration Manual page 425

Disabling and enabling devices
It is only possible to disable one device at the time, and then enable another device at the time.
If you trying to disable two devices after each other, a dialogue window appears (see
on page 425).
Figure 123: Failed to enable/disable device
1. In the Devices tab, right-click a device to be disabled.
2. Select Disable device.
The Device ID of the disabled device is now highlighted with red color.
3. Right-click a device to be enabled.
4. Select Enable devices. The Device ID of the enabled device is then highlighted with black
color.
5. Repeat step 2 - 4 to disable/enable additional devices.
Deleting and enabling devices
It is possible to delete devices that are not online, and then enable another devices until
maximum allowed devices are reached. If you trying to enable several devices than allowed, the
following dialogue window appears (see
Figure 124: Too many devices enabled
1. In the
Devices
2. Right-click and select Delete.
3. Select the device(s) to be enabled.
Avaya DECT R4 - Installation and Maintenance Guide
figure
tab, select the device(s) to be deleted.
124).
Device Manager
figure 123
425
02/2016