Avaya DECT R4 Installation And Administration Manual page 26

Avaya IP-DECT System Description
Assign the role of master to one IP base station or gateway. The IPBS/IPBL can also act as a
DECT Radio and have an active DECT Radio and an active DECT Master software component.
All other IPBS/IPBLs will only have the software component "DECT Radio" active. The software
component "DECT Master" will only be active in the Master, in all other cases it will be
deactivated.
Multiple-site installation
You can use the single site layout for installation on several sites. The sites may have one
DECT Master per site and one or several base stations at each site. Communication Manager is
centrally located (may be one of the sites), see
The system capacity for a multiple-site layout is:
Up to 1000 users
●
When the number of system IDs used in the installation is between 1 to 36:
●
Max. 1023 IPBS / Master
●
Max. 240 IPBL / Master
●
When the number of system IDs used in the installation is between 37 to 292:
●
Max. 127 IPBS / Master
●
Max. 127 IPBL / Master
●
Figure 4: Multiple site layout with one IP-DECT Master per site
Site 1
DECT Radio
The lines displayed between the Communication Manager, the respective DECT Master and
the DECT Radios in
modules.
Note:
An IPBS/IPBL includes both the software components DECT Master and DECT
Note:
Radio.
External handover is only possible to do within each site, not between sites.
26
Avaya DECT R4 - System Description
DECT Master
DECT Radio DECT Radio
figure 4 are used to indicate the logical connection between the software
figure 4.
IP PBX
Site 2
LDAP
DECT Master
DECT Radio DECT Radio DECT Radio
02/2016