Avaya DECT R4 Installation And Administration Manual page 399

Create a new Number for the corresponding device type
●
Associate the Number with the device.
●
Refer to the following chapters for a description.
The Device Manager
AIWS is opened in a web browser by typing the IP address of AIWS in the address bar. Then
click Device Manager to reach the Device Manager GUI.
The Device Manager window consists of three areas: Menu, Toolbar and Work Area. The
Toolbar has three tabs: Devices, Numbers and Templates. When one of these tabs is selected
the available devices types will be shown in the left hand pane of the work area. The right hand
pane shows the devices, numbers or templates which have already been configured.
In the upper part of the Work area there are search fields where different search criteria can be
selected depending on which tab that is displayed.
Figure 104: Device Manager window areas
Sorting the list
By default the lists in Devices, Numbers, and Templates are sorted by Device ID, Number ID,
and Name respectively. To sort the list by any other column, click on the appropriate column
heading. To reverse the sort order, click on the column heading again. The sorting order is
indicated by an up or down arrow in the column heading.
Filtering the list
By default the list in each tab shows all available Devices, Numbers, or Templates. It is possible
to filter the list by selecting the desired device type in the Device types: column in the left pane.
Avaya DECT R4 - Installation and Maintenance Guide
1
.
1
Device Manager
399
02/2016