Avaya DECT R4 Installation And Administration Manual page 66

Installing and operating the IPBS and IPBL
Note:
For more information about power distribution, see
Note:
page 87.
Software
To update software in the IPBS1, download new software without disconnecting the equipment.
The new software is stored in flash memory. For more information See
Connectors
One 8-pin RJ45 modular jack for LAN/PoE
●
One 8-pin RJ45 modular jack for an external power supply
●
One 6-pin RJ12 modular jack for factory testing
●
LEDs
Status of LED1 (lower LED)
Steady Green
Quick flashing amber
Steady Amber
Alternating red/green
Status of LED2 (upper LED)
Not lit
Steady green
Slow flashing green
Flashing amber
Slow flashing amber
Steady amber
Flashing red
66
Avaya DECT R4 - Installation and Maintenance Guide
Turning on the base station
Description
Operational
Download of firmware in progress.
TFTP mode
No Ethernet connection
Description
IPBS operational and no traffic
Air synchronization OK
IPBS operational and traffic
Air synchronization OK
Air synchronization OK and fully occupied with
traffic
Air synchronization inadequate and no traffic
Air synchronization inadequate and fully
occupied with traffic
Air synchronization inadequate and traffic
No air synchronization - searching for air sync
candidates
on
Updating on page 183.
02/2016