Installing and operating the AIWS and the AIWS2
1. On the AIWS Start page, click Configuration. The Configuration page opens.
2. In the left pane, select Other Settings > Advanced Configuration. The AIWS Advanced
Configuration page appears.
3. Click Device Management. The Device Handlers page appears.
Figure 142: The Device Handlers page.
4. Enter the address to the Unite module that is handling the Device Manager, followed by
the appropriate service.
If IP-DECT handset is to be managed in the Device Manager, enter <Unite IP address>/
●
DECT
If IP-DECT Base Station is to be managed in the Device Manager, enter <Unite IP
●
address>/IPDECT
5. Click Activate.
Device handling configuration
IP-DECT Handsets and Chargers
It is possible to set the types of devices that can login to AIWS. This enables a possibility for
example, to enable portable devices log in to one device manager and to enable chargers to log
in to another device manager.
1. Login to AIWS.
2. Click on Configuration.
3. In the left pane, select Other Settings > Advanced Configuration.
4. Under DECT Interface, select Device Handling.
462
Avaya DECT R4 - Installation and Maintenance Guide
02/2016