Avaya DECT R4 Installation And Administration Manual page 371

AIWS Enterprise (AIWS A, original AIWS)
●
- In Configuration > Other Settings > Advanced Configuration > Device
Management:
Replace the address 127.0.0.1/DECT with the IP address of AIWS B plus /DECT,
that is, if AIWS B has the IP address 192.168.0.2, change to 192.168.0.2/DECT.
Click Activate.
- In Configuration > Other Settings > Advanced Configuration > DECT Interface >
IP-DECT:
Click "Factory" to remove IP addresses. Click Activate.
Figure 86: Removing DECT IP addresses.
For settings in the added AIWS, see above.
Functionality distributed on three AIWS modules
A system configuration with three AIWS's is required when the following three conditions exist:
there are more than 120 cordless telephones simultaneously in the system
●
an external application is connected, for example using OAP
●
Central Phonebook with LDAP/TFTP or NetPage Advanced is used
●
An example presenting a distributed solution is shown in
Avaya DECT R4 - Installation and Maintenance Guide
Installation and configuration
figure 87.
371
02/2016