Connect Device To Computer - Avaya DECT R4 Installation And Administration Manual

Connect Device to Computer

This section describes how to connect the devices to the computer running WinPDM.
The device is connected to the computer running the WinPDM via the USB port. The device
must be set up to handle this connection according to the instructions in the manual for the
device.
Example of connected devices are shown in
Depending on connected device, a Device Wizard window or a New Number Wizard window
might be shown. In this case, click the Do nothing option and then click the OK button.
Avaya DECT R4 - Installation and Maintenance Guide
Figure 9. Connection to the computer running WinPDM
Figure 10. The Device wizard
figure 9.
USB port
Installation and configuration
02/2016
325