Avaya DECT R4 Installation And Administration Manual page 258

Configuring Avaya Aura
Configuring the signaling group for LSP setup
After adding first page of the signaling group on the main server (as mentioned in the heading
Configuring the signaling group), now go to the page-2 of the signaling group and configure
the page as below.
Note:
Note: Below page will display only with Communication Manager 5.2 or later
Note:
version and with PE configuration only.
change signaling-group 2
Enable on Survivable Processors (ESS and LSP): all
258
Avaya DECT R4 - Installation and Maintenance Guide
®
Communication Manager
LIMIT SIGNALING GROUP USAGE
Enable on the main Processor(s)? y
Page 2 of 6
02/2016