To save a telephone configuration as a template see chapter PDM
Template from a Number
number
on page 406.
Synchronizing a telephone with PDM/AIWS
After installing and saving a telephone, it will be synchronized each time it is connected to the
PDM/AIWS. The synchronization transfers parameter changes between the telephone and the
PDM/AIWS and vice versa as follows:
If a parameter has been changed in the telephone, it will be transferred to PDM/AIWS.
●
If a parameter has been changed in PDM/AIWS while the telephone was disconnected, it
●
will be transferred to the telephone.
If the same parameter has been changed in both PDM/AIWS and the telephone, the value
●
in PDM/AIWS will be transferred to the telephone.
Avaya DECT R4 - Installation and Maintenance Guide
on page 345, or chapter AIWS
Installation of telephones
Create a Parameter
Creating a parameter template from a
209
02/2016