Authentication And Administration - Avaya DECT R4 Installation And Administration Manual

Authentication and administration

Administration on Elise 3 Server (AIWS2 Hardware) is done from a web browser. You need a
user name and password in order to access the administration pages.
!
Important:
The default passwords must be changed to prevent unauthorized access.
Important:
Authentication
There are two different users in all Elise 3 Server (AIWS2 Hardware) products; admin and
sysadmin.
The user admin has the default password "changeme" and is used for administration and simple
troubleshooting of the product. The admin has permission to change all passwords except the
sysadmin password.
The user sysadmin has the default password "setmeup" and is used for advanced
troubleshooting. The user also has access to all administration pages. The sysadmin has
permission to change passwords for all users in the product.
In addition, there are two other users in some Elise 3 Server (AIWS2 Hardware) products. One
is called user and the default password is "password". This user is product dependent and its
usage is described in corresponding product documentation. This user does not have access to
the administration pages where passwords normally are changed. The user can change its own
password on the following page; http://xxx.xxx.xxx.xxx/admin/public/user_chpass.shtml. The
password can also be changed by the users admin and sysadmin.
The other user is called ftpuser and the default password is "changemetoo". The user is
available for products with a FTP area. The user can change its own password on the following
page; http://xxx.xxx.xxx.xxx/admin/public/ftpuser_chpass.shtml.
Administration
To access the web pages below, the user admin is used.
Avaya DECT R4 - Installation and Maintenance Guide
AIWS2 Overview
569
02/2016