Example: Configuring Ieee 802.3Ah Oam Support On An Interface - Juniper EX9200 Features Manual

Example: Configuring IEEE 802.3ah OAM Support on an Interface

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Monitoring the Loss of Link Adjacency on page 12
Monitoring Protocol Status on page 13
Configuring Threshold Values for Fault Events in an Action Profile on page 10
Applying an Action Profile on page 10
Setting a Remote Interface into Loopback Mode on page 11
Enabling Remote Loopback Support on the Local Interface on page 15
Example: Configuring IEEE 802.3ah OAM Support on an Interface on page 21
Ethernet Interfaces Feature Guide for Routing Devices
Configure 802.3ah OAM support on a 10-Gigabit Ethernet interface:
[edit]
protocols {
oam {
ethernet {
link-fault-management {
interface xe-0/0/0 {
link-discovery active;
pdu-interval 800;
pdu-threshold 4;
remote-loopback;
negotiation-options {
allow-remote-loopback;
}
event-thresholds {
frame-error 30;
frame-period 50;
frame-period summary 40;
symbol-period 20;
}
}
}
}
}
}
link-fault-management on page 45
IEEE 802.3ah OAM Link-Fault Management Overview on page 3
Configuring IEEE 802.3ah OAM Link-Fault Management on page 5
Enabling IEEE 802.3ah OAM Support on page 6
Configuring Link Discovery on page 16
Configuring the OAM PDU Interval on page 6
Configuring the OAM PDU Threshold on page 7
Chapter 1: Configuring Ethernet OAM Link Fault Management
21