Table 37: Copper Interface Support And Optical Interface Support For Gigabit Ethernet Sfp Transceivers For The Qfx Series - Juniper QFX5100 Hardware Manual

Table 37: Copper Interface Support and Optical Interface Support for Gigabit Ethernet SFP
Transceivers for the QFX Series
Standards
Compliance Specifications
1000BASE-T Product SKU
number
NOTE: On
QFX5100-48S and
Supported models
QFX5100-96S
devices, this
transceiver can be
forced to 100 Mbps
speed using the
set
interface speed
command.
Signaling rate
(range)
Connector type
Fiber pairs
Transmit and
receive wavelength
Average transmit
launch power
(minimum)
Average transmit
launch power
(maximum)
Average receive
power (maximum)
Receive sensitivity
DOM support
Fiber type
Operating range
Copyright © 2016, Juniper Networks, Inc.
QFX-SFP-1GE-T
QFX3008-I
QFX3500
QFX5100-24Q (management ports only)
QFX5100-48S
QFX5100-48T (management port only)
QFX5100-96S
1.25 GBd +/- 100 ppm
RJ-45
–
–
–
–
–
–
Not available
–
100 m (328 ft)
Chapter 8: Port and Interface Specifications
95