Lighten/Darken (Adjusting The Copy Density); Pages Per Side (Copying Two Pages Onto One Sheet) - Fuji Xerox Versant 80 Press User Manual

4 Copy
Note
Color
Copies in full color.
Black & White
Copies in black and white regardless of the colors in the original document.
Note

Lighten/Darken (Adjusting the Copy Density)

This feature allows you to select a copy-density level from seven levels.
1
Use [
4

2 Pages per Side (Copying Two Pages onto One Sheet)

This feature allows you to copy two pages of a document together onto one side of a single
sheet of paper.
When you select [2 Pages per Side], [Auto %] is automatically selected in [Reduce/Enlarge].
The machine automatically sets the copy ratio and makes copies of the images so that they
fit on the selected paper.
Note
For information on how to copy four or eight pages of a document together onto one side of a single sheet of paper, refer
to "Pages per Side (Copying Multiple Pages onto One Sheet)" (P.180).
1
Select [2 Pages per Side].
138
• If a color document is in one of the following conditions, the machine may copy the document in
black and white.
- The colored area is too small.
- The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color. For
more information, refer to "Output Color Recognition" (P.435).
• If the use of certain colors is not allowed, the available colors will be restricted. For more information,
refer to "Service Access" (P.537).
] and [ ] to set a density level.
• When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio), image loss
may occur depending on the image size of the document.
• Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the tray
containing A4 paper is selected. If no tray contains A4 paper, the machine selects a tray based on
the [Auto Paper Off] setting. For information on [Auto Paper Off], refer to "Auto Paper Off" (P.464).