Virtual Router Redundancy Protocol (Vrrp); Ipv4 Vrrp Commands; Advertise-Interval - Dell Z9500 Reference Manual

Virtual Router Redundancy Protocol
(VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking operating system.

IPv4 VRRP Commands

The following are IPv4 VRRP commands.

advertise-interval

Set the time interval between VRRP advertisements.
Z9500
Syntax
advertise-interval {seconds | centisecs centisecs }
To return to the default settings, use the no advertise-interval command.
Parameters
seconds
centisecs
centisecs
Defaults 1 second or 100 centisecs.
Command INTERFACE-VRRP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
1826
Enter a number of seconds. The range is from 1 to 255. The
default is 1 second.
Enter the keyword centisecs followed by the number of
centisecs in multiple of 25 centisecs. The range is 25 to
4075 centisecs in multiples of 25 centisecs.
Description
Added support for centisecs on the Z9500.
Added support for centisecs on the Z9000, S6000, S4820T,
S4810, and MXL.

Virtual Router Redundancy Protocol (VRRP)

61