Dell Z9500 Reference Manual page 1779

Hide thumbs Also See for Z9500:

Table of Contents

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

For specific interoperability limitations regarding the S-Tag TPID, refer to the Dell

Networking OS Configuration Guide.

The four characters you enter in the CLI for number are interpreted, as shown in

the following table.

portmode hybrid

untagged frames. A port configured this way is identified as a hybrid port in report

vlan-stack trunk

Stackable VLAN network.

VLAN Stacking

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the E-Series ExaScale. C-Series and S-Series

accept both bytes of the 2-byte S-Tag TPID.

Introduced on the E-Series ExaScale.

Introduced on the C-Series and S-Series.

Resulting TPID

— sets a port (physical ports only) to accept both tagged and

— specifies a Layer 2 port or port channel as a trunk port to the