Lacp Ungroup Member-Independent - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

To delay the system from bringing up the VLT port for a brief period to allow IGMP

Snooping and Layer 3 routing protocols to converge, use the delay-restore

parameter. Use this feature:

show vlt statistics

lacp ungroup member-independent

Prevent possible loop during the bootup of a VLT peer switch or a device that accesses the VLT domain.

lacp ungroup member-independent {vlt | port-channel}

port-channel

Virtual Link Trunking (VLT)

peer-link is restored between VLT peer switches. The range

from 1 to 1200. The default is 90 seconds.

Introduced on the Z9500.

Introduced on the M I/O Aggregator. This command is

supported in Programmable-Mux (PMUX) mode only.

Introduced on the S6000.

Introduced on the Z9000.

Introduced on the S8420T.

Introduced on the S4810.

after a VLT device is reloaded.

if the Peer VLT device was up at the time the VLTi link failed to the time when it

was restored.

— displays statistics on VLT operations.

Force all LACP port-channel members to become

switchports.

Force all VLT LACP members to become switchports.