Dell Z9500 Reference Manual page 1810

Version
9.7(0.0)
9.7(0.0)
9.5(0.0)
9.2(0.2)
9.2(0.0)
9.0.2.0
Example
Dell#show vlt mismatch
Domain
-------
Parameters
----------
Unit-ID
Vlan-config
------------
Vlan-ID
-------
100
Vlan IPV4 Multicast Status
--------------------------
Dell#
Example for Q-
Dell#show vlt mismatch
in-Q
Domain
------
implementatio
Parameters
n over VLT
----------
PB for stp
Vlan-type-config
----------------
Codes:: P - Primary, C - Community, I - Isolated, N - Normal
vlan, M - Vlan-stack
Vlan-ID
-------
100
Port-type-config
----------------
Codes:: p - PVLAN Promiscuous port, h - PVLAN Host port, t -
PVLAN Trunk port,
port, n - Normal port
1810
Description
Introduced on the S6000-ON.
Introduced the support for Q-in-Q implementation over
VLT on the S-Series and Z-Series.
Introduced on the Z9500.
Introduced on the Z9000, S4810, and S4820T.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the S6000.
Local
-----
0
Local Mode
----------
--
Vlan-ID Local Status
-------- ------------
4094 Active
Local
-----
Enabled
Local
-----
N
mt - Vlan-stack trunk port, mu - Vlan-stack access
Peer
-----
1
Peer Mode
---------
L3
Peer Status
-----------
Inactive
Peer
----
Disabled
Peer
----
M
Virtual Link Trunking (VLT)