Preface; Notes On This Manual; Registered Trademarks; Copyright - GRAPHTEC FC8000 Series User Manual

Thank you for choosing a Graphtec FC8000 Series plotter. The FC8000 Series plotters employ a digital
servo drive system to achieve high-speed and high-precision cutting. In addition to cutting marking film
and other media, an FC8000 series plotter can also be used as a pen plotter. To ensure high cutting quality
and optimal productivity, be sure to read this User's Manual thoroughly prior to use.

Notes on this Manual

(1) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, without the prior written permission of Graphtec Corporation.
(2) The product specifications and other information in this manual are subject to change without notice.
(3) While every effort has been made to provide complete and accurate information, please contact your sales
representative or nearest Graphtec vendor if you find any unclear or erroneous information or wish to make
other comments or suggestions.
(4) Notwithstanding the stipulations in the preceding paragraph, Graphtec Corporation assumes no liability for
damages resulting from either the use of the information contained herein or the use of the product.

Registered Trademarks

All names of companies, brands, logotypes, and products appearing in this manual are the trademarks or
registered trademarks of their respective companies.

Copyright

This User's Manual is copyrighted by Graphtec Corporation.

Preface

v