Documents; Acceptable Size And Thickness; Acceptable Number Of Documents; Image Quality (Mode Key) - Pitney Bowes 9930 Operator's Manual

3.8 Documents

3.8.1 Acceptable Size and Thickness

Maximum Width/Length:
Minimum Width/Length:
Thickness:
Effective Scanning Area
Effective Printing Width:

3.8.2 Acceptable Number of Documents

A maximum of 50 documents can be set on the Automatic Document Feeder at
one time. Adjust the Document Guide to make sure the document is centered in
the ADF.
NOTES:
1. Transmission time is increased on documents with pictures or large dark
areas
2. Make sure that correction fluid has dried before transmitting or copying.
3. If using "Post It" notes or the like, make sure the glued edge is being fed into
the fax unit first.
4. Printing outside the prescribed range may not be transmitted successfully.
5. Do not use paper that is pressure sensitive, glossy, wrinkled, curled or folded
too thin (onionskin, airmail), too thick, smaller than 5"x5"(127mm x 127mm),
cloth or metal. Make a photo copy first and then send the copy or place
original in a Document Carrier. Document Carriers should be sent one at a
time.

3.8.3 Image Quality (Mode Key)

Pressing the MODE Key on the Operator Control Panel sets the mode or image
resolution. Since most documents can be sent in NORMAL mode, NORMAL will
always appear in the display whenever a document is first placed in the ADF. You
can select FINE or EXTRA FINE Mode (by pressing the MODE key) before you
send a document in order to improve the appearance of the transmitted page.
11.75" x 78.7" (297 mm x 2,000 mm)
5.8" x 5" (148 mm x 128 mm)
Single Page: 12 to 30 lbs.
0.0024"to 0.006" (0.06mm to 0.015mm)
Multiple Pages: 12 lbs. to 20 lbs.
0.0024" to 0.0048" (0.06mm to 0.012mm)
9.92" (252 mm)
8.20" (208 mm) (A4: 202mm)
23