Loading Paper - Pitney Bowes 9930 Operator's Manual

3.6 Loading Paper

Anyone can add paper to the front loading, easy to access paper cassette(s) of
the Model 9930 with minimal effort. Installation of one or two different sizes
and/or quantities of paper is a simple procedure. If receiving volumes increase
over time, add another cassette.
With possibly three cassettes present, there is no receiving guesswork. Once the
machine is set up and the paper is installed in the cassettes, the Model 9930
decides whether reduction is necessary to fit onto any letter-size paper. Or, if
legal paper is installed, in the second or third cassette, the unit may decide that a
received image might be best suited to print on legal size if too big for letter-size.
To load the Main Paper Cassette:
1. Pull the Cassette completely out from
underneath the front of the fax unit.
2. Select a supply of approximately 250
sheets of paper (maximum) to install
in the Main Paper Cassette. Then,
while holding the stack loosely, tap
the edge of the stack against a flat
surface to align the edges.
3. Adjust the paper length guide.
4. Adjust the paper width guide.
19