Polling Another Machine (Simple Polling) - Pitney Bowes 9930 Operator's Manual

4.6.3 Polling Another Machine (Simple Polling)

To poll a document from another fax unit:
Do This
1. If you need to establish a polling Passcode, refer to
Section 5.7.1, Step #17 for instructions.
2. Check to be sure no documents are inserted in the
Model 9930 Automatic Document Feeder (unless you
are Turnaround Polling).
3. Dial the remote system by either entering a phone
number from the Numeric Keypad, selecting a Speed
Dial Number, pressing a One Touch Key, or pressing a
P-Key.
4. Press SEND/RECEIVE.
5. Press YES
6. Enter the Passcode, if required by the fax unit you are
polling.
7. Press YES after entering the four-digit Passcode or NO
if a Passcode is not required.
NOTES:
1. To use an AutoDial job or P-Key to poll after hours, see Section 5.3.2 (Polling
with Programmable AutoDial Jobs) for the procedures to poll using these
methods.
2. If you attempt to poll with pages loaded in the Feeder, the machine will switch
into the Send Mode. Pages should only be loaded in the Feeder if you intend to
Turnaround Poll or Send.
instructions on performing this Function.
3. There is no universal polling standard. It may not be possible for your Model
9930 to poll certain non-Pitney Bowes machines.
Refer to Section 4.6.6 (Turnaround Polling) for
50
This Happens
The Number appears in the
display.
DO YOU WISH TO POLL?
ENTER PASSCODE
IF NEEDED __ __ __ __