Setting The Date And Time; Considerations; System Date (#101) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Setting the Date and Time

After supplying power to the control unit, use the following procedures to set the system clock:
System Date (#101) to set the month, day, and year
System Time (#103) to set the hour and minutes
Automatic Daylight/Standard Times (#126) to automatically update the system clock
Turn this feature off if you live in an area without daylight savings time.

Considerations

Backup Programming—Automatic (#123) uses the System Date and System Time to
schedule the automatic backups.
Backup Programming—Automatic (#123) and Backup Programming—Manual (#124) do
not back up the System Date or the System Time.
Restore Programming (#125) does not restore the System Date or System Time.
Be sure that the System Date and System Time are set correctly before using backup
procedures.

System Date (#101)

Use this feature to set the month, day, and year. The system displays only the month and day on
display telephones when the telephone is idle; the month, day, and year print on SMDR call
reports.
Considerations
The System Date date-stamps the backup files when you use Backup Programming.
Programming
To change the System Date:
f00ss#101
1. Press
2. Enter today's date in the form "mmddyy" (month, day, and year), including leading zeros for
single-digit months or days. For example, to enter April 26, 2001, press
display similar to the following appears:
System Date
Data 042601
3. Select another procedure, or exit programming mode.

Setting the Date and Time

3-10
3
3
3
3
3
at extension 10 or 11.
042601
. A