Avaya PARTNER Installation And Use Manual page 34

®
PARTNER Advanced Communications System Installation, Programming, and Use
5. Remove the clear plastic protectors from the
connectors on the right side of the wall-
mounted PARTNER ACS processor module
and the module to be added by grasping the
tabs on the ends of the protector and lifting
(see Figure ).
6. Slide the second module onto the PARTNER
ACS processor module, making sure the
mounting tracks interlock (see
7. Attach the 2-slot carrier to the top right side of
the two modules (see
engaging the connectors on the modules to the
carrier.
Installing the Control Unit
2-6
Figure ).
Figure ), properly
Figure 2-3. Removing the Plastic
Protector
Figure 2-4. Module Mounting Tracks
Mounting
Tracks
Figure 2-5. Attaching the 2-Slot
Carrier
PARTNER
6 2 0
E U L O D M
Tab
Tab