Direct Extension Dial Button (#113) - Avaya PARTNER Installation And Use Manual

Programming
To identify the lines on which outside calls should be answered for Direct Extension Dial:
f00ss#205
1. Press
2. Enter the desired two-digit system line number.
3. To assign or unassign Direct Extension Dial, press
appears:
1 = Assigned
2 = Not Assigned (the factory setting) 
4. To specify another line, press
then repeat Step 3.
5. Repeat Steps 3 and 4 for all desired lines.
6. Select another procedure, or exit programming mode.

Direct Extension Dial Button (#113)

Use this feature to program a button to turn Direct Extension Dial (DXD) on and off. Direct
Extension Dial permits an outside caller to dial an extension or Hunt Group directly, without the
aid of the operator. DXD calls also can be transferred directly into a Calling Group. It is ideal for
outside callers who frequently talk with specific employees or service groups and know the
extension number they are trying to reach. When an outside call rings on a line programmed with
Direct Extension Dial, the system picks it up after a specified number of rings and plays a short
message prompting the caller to dial the digits of the designated extension, Hunt Group, or
Calling Group.
Considerations
This feature is available only on the system telephone at extension 10.
Use only one automated answering option for incoming calls (either this feature, the
Automated Attendant Service of the voice messaging system, or a PARTNER Attendant).
This feature can handle three outside calls simultaneously.
If you have lines programmed for Direct Extension Dial and Automatic System Answer,
Direct Extension Dial answers the call first.
A Direct Extension Dial Button must be programmed on a button with lights on the system
display telephone at extension 10. (This feature is not supported on a button without lights.)
Do not use Direct Extension Dial in places where Hold Disconnect Time (#203) is not
recognized, because if a caller hangs up after Direct Extension Dial answers, the line
appears to be busy.
The Direct Extension Dial Button returns to the status (on/off) it was in before a power
failure occurred or System Reset (#728) was used.
Direct Extension Dial affects incoming calls only on lines identified using Direct Extension
Dial Lines (#205).
n p
or until the line number appears on the display,
7
.
D
until the appropriate value
7
7
Direct Extension Dial Features
Operator Features
7-11