Avaya PARTNER Installation And Use Manual page 51

c. Select the translation file you want to send to the PARTNER system, and click the Open
button.
The PARTNER System Translation Send status box appears, showing the status of the
transfer. When the transfer is complete, a message box appears stating that the transfer
was successful.
d. Click the OK button.
The translation file now resides on the Remote Access card in the PARTNER system. This
translation file will not be used by the PARTNER system until you "restore" it to the
PARTNER system.
e. From the Administration menu, select Restore System Translations.
A message box appears stating that the restore has started and that your connection to
the PARTNER system will be disconnected.
f. Click the OK button.
A message box appears stating that your connection to the PARTNER system was ended.
g. Click the OK button.
The PARTNER system is now using the system translation you programmed and restored.
Installation
The T1 Module
2-23