Centralized Telephone Programming Flow Chart—How To Use - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Centralized Telephone Programming Flow Chart—How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
To Enter Programming Mode:
f00
— Press
ssc
— Press
— Dial the extension number to be programmed. Buttons on to which lines or pools are assigned
light up to show the current Line Ringing setting: remaining buttons can be programmed with
Auto Dial number or features.
To Program Another Feature at the Same Extension:
— After you program one feature, continue with the instructions in the box for the next feature.
To Change Setting For Another Extension
c
— Press
— Dial the new extension's number
To Erase A Feature or Auto Dial Button:
— Press the programmed button
!
— Press
To End Programming Mode:
f00
— Press
Icon Description
= Factory setting
= Button with lights required
= Button with lights recommended
Centralized Telephone Programming Flow Chart—How to Use
E-10