Avaya PARTNER Installation And Use Manual page 149

Programming
To assign pools to a pooled extension:
f00ss#314
1. Press
2. Enter the system extension number to be programmed.
There is a steady red light next to each button that has a line assigned and a flashing red light
next to each button that has a pool assigned. To remove all existing pool assignments, press
r
before selecting a pool.
3. Enter the desired pool access code (880, 881, 882, or 883). For example, to select pool 881,
881
press .
4. Do one of the following:
If you want to assign the pool to the first available button with lights, press
display similar to the following appears:
Pool Ext Assign 15 P881
1 Assigned
If you want to remove a pool assignment, press
following appears:
Pool Ext Assign 15 P881
2 Not Assigned
For auxiliary pools only, if you want to assign the pool to a specific button, press
display similar to the following appears:
Pool Ext Assign 15 P881
3 Select a Button
Then press a button with lights to assign the auxiliary pool to that button. If you use option
3 after an auxiliary pool has been assigned, the auxiliary pool moves from the old button to
the new button you select.
5. Do one of the following:
To assign another pool for this extension, press
code appears on the display. Then repeat Step 4.
To program another extension, press
6. Select another procedure, or exit programming mode.
Programming System Options
4
.
D
until a display similar to the
n p
or
N P
+
D
until a
3
. A
until the pool access
and begin at Step 2.
Pool Programming
4-53