Avaya PARTNER Installation And Use Manual page 222

Advanced communications system
Hide thumbs Also See for PARTNER:
Table of Contents

Advertisement

®
PARTNER
Advanced Communications System Installation, Programming, and Use
If Direct Extension Dial is on, callers hear ringing when the call is transferred regardless of
the Music-on-Hold (#602) or Ring on Transfer (#119) setting.
By default, unanswered calls return to extension 10. You can use Transfer Return Extension
(#306) to specify a different Transfer Return Extension for extension 10. In this case, all
unanswered Direct Extension Dial calls return to the specified extension as do unanswered
calls manually transferred by extension 10.
If Do Not Disturb (F01) is active at a directly dialed extension, the call returns to extension 10
(or its transfer return extension), unless Call Forwarding (F11), Call Coverage Rings, or
VMS Cover Rings is used or on.
Programming
To assign or unassign a Direct Extension Dial Button with lights at extension 10:
f00ss#113
1. Press
2. Do one of the following:
If you want to assign Direct Extension Dial to the first available button, press
until a display similar to the following appears:
DXD Button
1 Assigned - Ext10
If you want to unassign Direct Extension Dial, press
following appears:
DXD Button
2 Not Assigned (the factory setting) 
If you want to assign Direct Extension Dial to a specific button, press
reads:
DXD Button
3 Select a Button
Then press a programmable button with lights to assign Direct Extension Dial to that
button.
3. Select another procedure, or exit programming mode.
4. Label the Direct Extension Dial Button at extension 10.
Using the Direct Extension Dial Button
To turn Direct Extension Dial on, press the Direct Extension Dial Button at extension 10. The
green light is on steady and Direct Extension Dial is on. If calls are ringing when you turn Direct
Extension Dial on, the calls are answered immediately by the system.
To turn Direct Extension Dial off, press the Direct Extension Dial Button at extension 10. The
green light goes off and Direct Extension Dial is off. Any calls being answered by the system
continue to hear the recorded message and are prompted to enter a destination extension.
Direct Extension Dial Features
7-12
7
.
D
until a display similar to the
3
7
D
. The display

Advertisement

Table of Contents
loading

Table of Contents