Using Remote Call Forwarding On A System Telephone - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Using Remote Call Forwarding on a System
Telephone
To forward calls manually:
f11
1. Press
2. Dial your extension number.
3. Dial the two-digit Personal Speed Dial code (80-99) that contains the destination outside
telephone number at which you want the calls to ring.
To remove Remote Call Forwarding manually:
f11
1. Press
2. Dial your extension number twice.
To forward calls using the programmed button:
1. Press the programmed button.
If an originating extension and a Personal Speed Dial code (80-99) were programmed on the
button, Remote Call Forwarding is activated (on a button with lights, the green light is on).
Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination telephone number was programmed, dial the two-digit Personal Speed Dial
code (80-99) that contains the destination outside number at which you want the calls to ring.
Remote Call Forwarding is activated (on a button with lights, the green light is on).
To remove Remote Call Forwarding by using the programmed button:
1. Press the programmed button.
If an originating extension and a destination extension were programmed on the button,
Remote Call Forwarding is deactivated (on a button with lights, the green light is off). Skip
Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination extension was programmed, dial your extension number again.
Remote Call Forwarding is deactivated (on a button with lights, the green light is off).
Remote Call Forwarding (F11)
8-62
.
.
8